What a pain for all owners of carpets a silly putty fond on the carpet is! However, it can occur to be not so difficult to get rid of a putty. From the article, you will learn how to get silly putty out of carpet easily.
Below you can see a list of instruments and ingredients you will have to prepare for this purpose. All of them are commonly used at home.
Contents
Things You’ll Need:
- Ice cubes
- Washing powder / Nail polish remover / Rubbing alcohol
- Cotton Balls / Clean cloth
- Spoon / blunt knife
- Sealable plastic bag
How To Get Silly Putty Out Of Carpet: The Method
1. Apply ice cubes
How to Get Silly Putty Out of Carpet -WIDEO
To get silly putty out of carpet, first, put the ice cubes on the carpet right where the stain is situated. The ice cubes should be in a sealable plastic bag so no liquid gets on the carpet. Otherwise, it will be more difficult for you to deal with the stain.
The usage of ice cubes is necessary for cooling the putty. This way, it becomes firm and easy to break and, consequently, to get rid of. The duration of the presence of the cubes on the stain is about 2-3 hours. Check if the cubes are intact from time to time.
When they are melted, change it to the new ones.
2. Scrape excess putty
The next step how to remove putty from carpet is scrapping itself. Use a blunt knife, a spoon, or a palette knife to do it.
You have to split the putty into pieces and remove them, prepare a trash can. Avoid using sharp instruments, since they will damage the carpet pile and will leave traces that you won’t be able to delete.
3. Apply Washing Powder
Then you will have to make a mixture of washing powder and water. Before you begin to prepare a mixture, make sure that your washing powder doesn’t include bleaches in its chemical structure. Dissolve 2 tablespoons of washing powder in a cup of warm water.
Stir the mixture with some cutlery until the washing powder vanishes. Wet a cotton ball or a cloth in the mixture and dab the stain. Leave the cover to soak the mixture for about 20 minutes. Next, remove undue liquid with a slightly wet cloth. The described procedure helps decide the problem of how to get silly putty out of carpet easier.
4. Blot with nail polish remover
The following step on how to remove silly putty from carpet is possible to do either after the previous one or instead.
If the stain still refuses to yield and disappear, you can resort to one more means, a nail polish remover or rubbing alcohol. Choose the option which is easier for you to find.
Before applying the ingredient to the stain, it is necessary to check if it is safe on some usually invisible side, in this case, it’s the backing of the carpet. Also, read an instruction for the detergent if you have it.
The technique is the same as you used in the step with the washing powder. Wet a cloth or a cotton ball in the nail polish remover and blot the stain. Try not to go outside the stained zone and move from outside to inside so you don’t increase the washing area.
5. Dry the area
After the stain is deleted, you should clean the washing area properly and dry it. In case the stain didn’t disappear, do this step though and repeat the washing procedure or you can consult with a carpet cleaner who will give you a piece of advice on how to how to get silly putty out of carpet.
First, take a dry cloth, soak it with the remains of the washing powder, the nail polish remover, and/or rubbing alcohol. Don’t rub the carpet, just press on it with the cloth and slightly move it from side to side.
Then moisture the area again to wash all the left detergents off. Let the carpet dry itself.
This is all! As you can see, the procedure appeared to be much easier and more realizable than it had seemed. We hope you learned all the information you needed to get silly putty out of carpet successfully and wish you good luck in the cleanup.
